ceiling. Friday , March 31st , 2017 - 15:39:43 PM
If the holes and cracks are large, then, you need to carry out the same procedure. But, before you start painting the ceiling, you need to sand the primer, and then add texture to the wall. Use a roller or a napkin for this procedure. Once the textured area has dried properly, complete the repair work by painting over it.
The ceiling is not cleaned and painted as often as the walls are, hence it needs to be cleaned first. Take a long broom and remove all the cobwebs and visible dirt from the ceiling. Inspect the ceiling and check if there is a need for patching. You'll have to do the patching before you apply the paint. Allow the patching compound to dry properly before you proceed. Smooth out the surface with sandpaper for an even texture. Applying a coat of primer before the paint is always a good idea.
Now, attach the balancing clip on one of the blades, such that it is approximately at the center of the blade. Run the fan at the earlier speed and check whether the wobble has lessened.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does Ceiling claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.